How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2833
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
32407143
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

How to thread the belt for the hydrolic pumps on a toro time

Customer Question

how to thread the belt for the hydrolic pumps on a toro time cutter mx 4260 riding mower. I have the belt In the correct location. The belt came off wile mowing some tree branches the belt is were it belongs . it never came off..
Submitted: 12 months ago.
Category: Small Engine
Expert:  Vince O. replied 12 months ago.

Hello, I have the shop manual for your machine and will send a link. See Section 5. https://1drv.ms/b/s!AqvmPfzg3ifPgsFoWFCwAr-x9JCbRg

Expert:  Vince O. replied 12 months ago.

Is the spring for the idler arm still there? #8