How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28921
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

One of my two Robo Swing R900 gate operators will not close

Customer Question

One of my two Robo Swing R900 gate operators will not close it's gate. Normally when the gate has closed, the only LED lights remaining on are "power" and "charge OK." In this case, the "timer power" LED remains while the "close relay" LED and the "timer-up" LED blink simultaneously about every nine seconds. No other problems are apparent.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

By manual, if timer power is lit, it has bad fuse?

Customer: replied 1 year ago.
OK, I can't find my spare fuses and will run to the store. I will be back in 30 minutes
Expert:  Curtis B. replied 1 year ago.

OK>

Customer: replied 1 year ago.
Will a 1.6A 125/250V fuse work?
Expert:  Curtis B. replied 1 year ago.

Sure

Customer: replied 1 year ago.
I replaced either fuse & gate would open and then close part way, stop & then the alarm would sound. I pushed the circuit breaker & the alarm would stop. When I push the control to open, the gate opens but won't close & the timer power red light would come back on. It then resumes beeping in nine seconds.
Expert:  Curtis B. replied 1 year ago.

Did you see the manual link I sent? Showing the manual for the closer? Does gate move freely or could it be binding?

Customer: replied 1 year ago.
I have the 2003 manual. Remote button is not stuck. Pressing central control "close" button doesn't help.
Expert:  Curtis B. replied 1 year ago.

Let me opt out and see if anyone else has any experience on these. Sorry. Please do NOT reply to me or it locks the question.