How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28119
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Zero turn will not engage blades and shuts off when i try to

Customer Question

Hustler zero turn will not engage blades and shuts off when i try to engage transmission
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just started today
JA: Do you have fuel in the tank? If so, is the shut-off valve open and the fuel clean?
Customer: Yes it runs good until I try to engage blades or levers to move the mower
JA: Do you plan on doing the work yourself?
Customer: yes if possible.
JA: Anything else we should know to help you best?
Customer: That is it.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Your run circuit is not complete. Check the two arm switches, one may be stuck, which will keep circuit from completing, and will kill engine when arm is moved or pto is turned on. If either arm switch is not closed, engine will kill.

Expert:  Curtis B. replied 1 year ago.

Did you find the problem?