How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28358
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I only get 2 volts to my PTO clutch. Clutch reads 2.2 ohms,

Customer Question

I only get 2 volts to my PTO clutch. Clutch reads 2.2 ohms, Ground is good to clutch. Only 2.2 volts on B= to clutch. All fuses ok but 30 amp bottom right fuse gets warm even when clutch is disconected. Has blown fuse a couple times. Suspect a short somewhere. Do you have any sugestions? Battery has been fully charged and 722D mower starts great and lights work. Checked PTO switch and test's good. Checked both relays and they work good and make and break properly.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Use a jumper wire to bypass the ammeter. Ampmeter should have full battery voltage passing through it. It may be causing the low voltage!

Expert:  Curtis B. replied 1 year ago.

I see question still open. Did you find the problem?