How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28066
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have dismantled my Sears chain saw Mod# 358.351062 to put

Customer Question

I have dismantled my Sears chain saw Mod####-##-####to put new fuel lines on that have crumbled. I ordered new lines from Sears and am having difficulty re-assembling them. Are there any instructions I can get on-line?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

You can't get lines into the tank? You need to cut the lines on a long taper , then use the tapered end to slip through the tank wall, then use needle nose pliers or forceps to pull the lines through.

Expert:  Curtis B. replied 1 year ago.

Did you see my response? Did you ge hoses through the tank?