How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Technicaldan Your Own Question
Technicaldan
Technicaldan, Technician
Category: Small Engine
Satisfied Customers: 110
Experience:  Accredited
94166128
Type Your Small Engine Question Here...
Technicaldan is online now
A new question is answered every 9 seconds

I Have a Honda EM 7000is and error code E 10 and E 20

Customer Question

I Have a Honda EM 7000is and error code E 10 and E 20
Submitted: 1 year ago.
Category: Small Engine
Expert:  Technicaldan replied 1 year ago.
E10 and E20 is Inverter and generator control unit communication failure.

The first thing that needs to be done is to check the harness between the inverter and GCU for broken wires.

If the harness is good, the inverter needs to be tested.

If the inverter tests good, then the GCU will be bad, and will need to be replaced.
Expert:  Technicaldan replied 1 year ago.

Here is the manual, there is a circuit diagram in there also.

Expert:  Technicaldan replied 1 year ago.

Please rate ;)