How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28369
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

The turns forever : Trying to loosen the on pie shape gear.

Customer Question

The nut turns forever
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: Trying to loosen the nuts on pie shape gear. Seems like they turn forever
JA: Is there anything else the Small Engine Technician should be aware of?
Customer: Already have new parts
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
Already sent money. Haven't got an answer
Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Curtis B. replied 1 year ago.

Make and model? What is this you are taking apart?

Customer: replied 1 year ago.
Pinion and sector gear pie shape la115 John deer
Customer: replied 1 year ago.
Expert:  Curtis B. replied 1 year ago.

Which one is the trouble maker? See link above. Bolt and nut being held while loosing?

Customer: replied 1 year ago.
No call thanks. It's 22 and 23
Customer: replied 1 year ago.
Is there nut on top side that I can't see?
Expert:  Curtis B. replied 1 year ago.

These are shoulder bolts, held by the 11 and 12 nuts. Are you holding the nuts,

Expert:  Curtis B. replied 1 year ago.

May need a thin wrench!

Customer: replied 1 year ago.
I found the nuts. Just next to impossible to get to
Expert:  Curtis B. replied 1 year ago.

Yes, a hard place to get at!