How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 15010
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I have a generac gp15000e that blows the 10 amp fuse

Customer Question

I have a generac gp15000e that blows the 10 amp fuse approximately 10 seconds after starting, I have ohmed all components and they are in spec. I have noticed that the SSR will energize when start button is pressed, then it denergizes then re-energizes after 10 seconds and that is when fuse blows
JA: I'll do all I can to help. Is there anything else the Small Engine Technician should be aware of?
Customer: not that i know of
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Hank F. replied 1 year ago.

The SSR can not be deenergizing, and then reenergizing 10 seconds later.

If the SSR deenergizes, the unit shuts down.

What are the model and serial numbers?