How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28098
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Troy-Bilt bronco 2011 like shown in the pictures.

Customer Question

I have a Troy-Bilt bronco 2011 like shown in the pictures. My question, how is possible to install back the Z fitting?
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: I have a broken PTO cable and trying to replace it
JA: Is there anything else the Small Engine Technician should be aware of?
Customer: No that I think. I just loose the spring end at the deck
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
This is the upper end of the cable? It has to go in first, then cable is fastened at the top, and the final connection is at the deck! Have to start at the top with the Z clip.
Customer: replied 1 year ago.
But how can I connect the Z fitting?, anything to remove first?, can't see the end of the handle.
Expert:  Curtis B. replied 1 year ago.
Expert:  Curtis B. replied 1 year ago.
See the top circled diagram.