How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28106
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have the deck off our Toro 5060 and trying to replace the

Customer Question

I have the deck off our Toro 5060 and trying to replace the center spindle but can not get the belt wheel off the spindle so I can replace the spindle. How do I get the belt wheel off the spindle so the spindle will drop through the deck?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
You have the nut off the pulley? The pulley should pry off, or a puller will have to be removed. There is a key in the shaft that has to come out before the shaft can be driven out the bottom. Usually two prybars under the pulley will be enough to get pulley off.