How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Generac V type PArt# ***** that I want to

Customer Question

Hello - I have a Generac V type PArt# ***** that I want to hook a new guradian generac generator to
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: the V type is a Automatic transfer switchj
JA: Is there anything else the Small Engine Technician should be aware of?
Customer: just what is needed to hook up a New Generac Guardian to the transfer switch
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
Old Generac V type auto transfer switch Part# ***** to install a new Generac Guardian 16KW aluminum generator - control wiring appears to need an added low voltage supply ?
Customer: replied 1 year ago.
Model # ***** the switch is 77032
Expert:  Hank F. replied 1 year ago.
What are the model and serial numbers of the genset?