How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14996
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

Onan 2.8kufa 26100e , starts and runs ,,as long as you hold

Customer Question

onan 2.8kufa 26100e , starts and runs ,,as long as you hold down start push sw, is not makeing 120 ac,, I FOUND A SMALL MAGNET,,LIKE LOOSE IN THE VAN BY THE ONAN ! WHATS THE FIX ?? THANKS gerald wells
Submitted: 1 year ago.
Category: Small Engine
Expert:  Hank F. replied 1 year ago.
There is no magnet in this genset. IT must have come from somewhere else. If this unit only runs as long as you hold the start switch, the 2 most common problems are that it is either low on oil, or it is no longer producing any electricity.