How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joe Your Own Question
Joe
Joe, Marine Mechanic
Category: Small Engine
Satisfied Customers: 7251
Experience:  ASE, electronics, Marine inboards and electronics, automotive drivability, all around repair tech,
20508815
Type Your Small Engine Question Here...
Joe is online now
A new question is answered every 9 seconds

How do I replace the screw post on a craftsman table saw,

Customer Question

How do I replace the screw post on a craftsman table saw,
Model no.###-##-####
Submitted: 1 year ago.
Category: Small Engine
Expert:  Joe replied 1 year ago.

Hello,

Thank you for allowing me to assist you, my name is Joe and I will be happy to assist you with your concern today.

I'm not sure which "screw" you are referring to, the adjuster knob you would remove from the nut on the back side and then thread out, if that is not what you were referring here are diagrams that show how everything goes together: http://www.searspartsdirect.com/model-number/315218050/0247/0744600.html

From there if you could let me know which part.

Thank you!
- Joe

Please rate my answer when ready. Bonuses are appreciated.
If for any reason you are not satisfied please reply back to me for further assistance to which I will be glad to help you. If you have any problems for any reason please reply back and let me know.
Thanks again for using justanswer and have a great day!

If you need any further assistance you can reply back at any time for my help.
I'd be happy to answer any other questions you have even if not related.