How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28703
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I had not checked the continuity of the wires to the

Customer Question

I had not checked the continuity of the wires to the switches, and in so doing, the wires to the seat safety switch were fine. However, the wires to switch for the blade lever did not have continuity. How do I proceed?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Run a jumper wire to mirror the existing wire, and if mower starts and runs replace the existing wire.

Expert:  Curtis B. replied 1 year ago.

Did you get it to work?