How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1140
Experience:  Owner/Service Technician at S & J Small Engines
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

New snowblower model 920402 Sno-Tek 24E. Assembled out of

Customer Question

new snowblower model 920402 Sno-Tek 24E. Assembled out of box .. started no problem ... wheels will not engage when traction drive clutch lever is depressed ...
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

Make certain that both wheels are locked onto the axle. Most of the time when these are shipped from the manufacture one wheel will not be locked onto the axle it makes it easier to move around with one wheel unlocked thus easier to unpack from box. Usually the right wheel is the one that will be unlocked or unpinned from the axle, you just need to move the pin over into the wheel so that it will drive or pull itself.

Customer: replied 1 year ago.
Corrected the issue with written instructions within minutes
Expert:  JohnF2015 replied 1 year ago.

I am glad that I could be of assistance to you.

Thank you it has been a pleasure to assist you.

Please take a moment to rate your experience.