How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I had a starter installed on my 4000. it starts and runs

Customer Question

I had a starter installed on my 4000. it starts and runs great, but the electric started to flicker and now nothing well work when the generator is running. Where would I look to see if a wire has came loose that may not have been tightened.
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

It sounds like the genset is not producing any voltage output. Can you test the output voltage on the control panel and see what if any voltage you are getting at the receptacles on the control panel? If you aren't getting any at this point which is most likely then I would look at the voltage regulator as the main issue.