How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28672
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a polaris 200 when it gets hot oil comes out between

Customer Question

Have a polaris 200 when it gets hot oil comes out between cylinder and the block do they have trouble with head bolts
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

The head bolts are the studs that run from the case, through the cylinder and through the cylinder head, It uses a gasket at the case and the head gasket. There is not a known problem, but you could remove the rocker cover and check to see that the 4 nuts for the studs. If it still leaks, the gasket at the case would need to be replaced. But that would require removing the head and cylinder, and piston from cylinder.