How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1264
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

Are you babe Briggs & Stratton or Troy Bilt pressure washer

Customer Question

Are you babe Briggs & Stratton or Troy Bilt pressure washer it's a 2700 I called Troy Bilt they say Briggs and Stratton is taken this line so my question is I cant get my fluid to come out of my tank when I'm under pressure its not pulling myself out of my soap tank the lines hooked up in the soap tank to the in front of the pressure valve
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
Model #020486
Expert:  Briggs-Fan replied 1 year ago.

Hi my name is ***** ***** welcome to Just Answer.

Expert:  Briggs-Fan replied 1 year ago.

With the engine off will it draw soap by squeezing the trigger with the water on ?

Customer: replied 1 year ago.
No it will not just try.
Customer: replied 1 year ago.
Hi John , am Jerry
Expert:  Briggs-Fan replied 1 year ago.

It sounds like it could be the chemical injector,

Customer: replied 1 year ago.
Well is the host supposed to be on the sitting beside the pressure regulator are back on the back side where the black hose hookup is I tried to take a couple of pictures to show you what I've got there
Expert:  Briggs-Fan replied 1 year ago.

That thing the hose is on is the chemical injector, it unscrew . Look at this link

http://www.repairclinic.com/PartDetail/b323p25/Troy-Bilt-Pressure-Washer-Chemical-Injection-Kit/192914GS/1941918?modelNumber=020209

It has a ball bearing and spring and I'm wondering if the ball bearing is stuck

Customer: replied 1 year ago.
I took that out and looked at it didn't see anything wrong the spring goes in first then the ball correct
Expert:  Briggs-Fan replied 1 year ago.

Have you tried with a low pressure nozzle ?

Customer: replied 1 year ago.
No I have not I'm using the yellow for Dick and Concrete
Customer: replied 1 year ago.
sorry I'm trying to use my speaker phone and its not cooperating with me
Expert:  Briggs-Fan replied 1 year ago.

OK try a low pressure tip , it may take a few for it to draw , most pumps only draw on low pressure tips

Customer: replied 1 year ago.
I'll try that tomorrow evening I'll give you a shout back then. Thank you for some leads hope that works.
Expert:  Briggs-Fan replied 1 year ago.

OK sounds good , it may take a few for it to draw etc . But I'll wait to hear back from you tomorrow