How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2835
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

I have A Poulan PP3816 type 2 16" chain saw, I took it

Customer Question

I have A Poulan PP3816 type 2 16" chain saw , I took it apart to clean and I can not figure out how to reassemble the trigger lockout back into the handle.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Vince O. replied 1 year ago.

Hello, did you knock out the roll pin to remove it? Did you remove the trigger too?

Customer: replied 1 year ago.
I removed the trigger but the was no roll pin it was all held in by the spring mec.
Expert:  Vince O. replied 1 year ago.

There should be 2 holes in the handle for 2 pins. See diagram.