How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1264
Experience:  over 15 years experience in small engine repair, multiple certifications
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

Craftsman modelwill not start. Brake/clutch set, shift to

Customer Question

Craftsman model###-##-####will not start. Brake/clutch set, shift to neutral. New solenoid. Turn key nothing happens. Will start when jumped directly from positive
battery terminal to starter.
Submitted: 2 years ago.
Category: Small Engine
Customer: replied 2 years ago.
Also checked fuse looks good no break in the wire. There is a 4 slot connector coming off the wiring near the fuse
should this be connect if so where can not find any place to connect it.
Expert:  Briggs-Fan replied 2 years ago.

Hi my name is ***** ***** welcome to just answer, when you jump it from the starter will it stay running ?