How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1132
Experience:  Owner/Service Technician at S & J Small Engines
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

After two years of no problem, I cannot raise my blades gh

Customer Question

After two years of no problem, I cannot raise my blades high enough to avaoid scalping. I have the height set on the highest setting. MY tires are fully inflated and the mower is blanced side-to-side and front-to-back. I have "bladed" grass and not a burmuda
type. Is there some adjustment that isn't shown in the manual? Wll I need to buy a full set of the next larger tires. (MODEL # *****)
Submitted: 2 years ago.
Category: Small Engine
Expert:  JohnF2015 replied 2 years ago.

Hi, my name is***** will be assisting you.

Has anything else changed about the machine? Have you changed blades? Can you measure from the ground to the blade tip with the deck in its highest position and let me know what that measures currently?

Expert:  JohnF2015 replied 2 years ago.

Had the machine been working properly up until now?