How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Master Electrician
Category: Small Engine
Satisfied Customers: 7497
Experience:  Proven Professional 48 years Experience
Type Your Small Engine Question Here...
Mike G. is online now
A new question is answered every 9 seconds

I have a craftsman 10inch table saw that quit working. As I

Customer Question

I have a craftsman 10inch table saw that quit working. As I started it, it was slow to get up to rpm's then it ran smoothly for one board. Tuned off, got another board and it wouldn't start at all. Did not throw circuit breaker.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Mike G. replied 1 year ago.

Hi, I'm Mike G and I'll be glad to assist you. The description of the problem suggests the start capasitor is bad. That's why the slow start and now the non-operation. Replace the capacitor.