How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28074
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Husqvarna ZTR 5424 start run problem. The motor starts,and

Customer Question

Husqvarna ZTR 5424 start run problem.
The motor starts,and runs fine. The machine worked perfect till I shut it off to
fill it with Gas. Now I have done this many times so don't ask if I did this or that.
I went to start it, and as I dropped the Parking brake, the motor died.
I removed the switch that is controled by the Parking brake and and held it shut and could move the machine a little till a motion lever (either side) would break contact with its switch. I could get the blade to engage for a second, before the ignition got cut off.
The parking brake switch seems to be working perfect. The seat interlock works perfect.
Before I start cutting wires to get rid of the Government inspired interlock switchs line,
IS THERE any simple relay or switch that has a tendency to fail? BTF
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Expert:  Curtis B. replied 1 year ago.

Looking at schematic, there are only the switches!

Expert:  Curtis B. replied 1 year ago.

pto switch?