How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28668
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 1976 ez go 3 wheeler, ser. # 760209-103687. My left

Customer Question

I have a 1976 ez go 3 wheeler, ser. # ***** My left side rear wheel has locked up. How do you remove the axle in order to inspect/replace the axle bearings. Do I have to get into the punkin to do this or are the retainers on the outside of the axle? thank you
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! With wheel and brake drum off, there will be a snap ring holding the axle in place. Remove the snap ring and use slide hammer or other tool to remove axle and bearing. No need to remove the center cover.