How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1132
Experience:  Owner/Service Technician at S & J Small Engines
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

Have a 2006 kawasaki brute force 750 installed new valves

Customer Question

Have a 2006 kawasaki brute force 750 installed new valves piston and rings new seals now I have coolant t getting in to pistons and it wont start retired it a couple times still no good
Submitted: 2 years ago.
Category: Small Engine
Expert:  JohnF2015 replied 2 years ago.

Hi, my name is John I will be assisting you.

I would first check the head gaskets this is normally the first place that will cause your problem. Make sure that the bolts are torqued down properly.

Expert:  JohnF2015 replied 2 years ago.
Do you still need assistance with this problem?
Please take a moment to rate your experience.