How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 15174
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I have a emarld 3 and it will not start there is no fire to

Customer Question

i have a emarld 3 and it will not start there is no fire to the plug
Submitted: 2 years ago.
Category: Small Engine
Expert:  Samantha-cssm replied 2 years ago.
We received your customer service inquiry, however, we are unable to respond to you because we do not have your email address. Please contact customer support at***@******.*** and provide us with your email address and a link to this question page so that we can help you. (http://www.justanswer.com/small-engine/98sij-emarld-will-not-start-no-fire.html). Thank you, ***** ***** Customer Support Team.
Expert:  Hank F. replied 2 years ago.
Hello!
My name is ***** ***** I am going to assist you with this.
I would need to know the actual model number of the genset to be able to help you, but depending on which ignition system you have, the likely problem is a bad set of points and condensor, possibly a bad coil - if a points type ignition, or a bad coil or ignition module if electronic ignition.
.