How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Toro self propelled model 20013 ser#(###) ###-####24099999

Customer Question

I have a Toro self propelled model 20013 ser#(###) ###-####24099999 and need advice on how to install a Part #104-8690 Torsion Spring in the handle Assy. I have not been able to dismantle the handle assy enough to thread the new spring into place. Can you help.
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.
If you can squeeze the steel bar enough that runs across under the handle and remove it from the right side of the upper handle you can replace the spring without removing anything else from the machine.
Expert:  JohnF2015 replied 1 year ago.
Do you still need assistance with this?