How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

If my generac generator has its orifice set but the

Customer Question

if my generac generator has its orifice set for lp but the units control panel is on ng could it cause oversoeed red light this happened but cleared out and I set panel to lp
Submitted: 1 year ago.
Category: Small Engine
Expert:  Hank F. replied 1 year ago.
My name is ***** ***** I am going to assist you with this.
What are the model and serial numbers of the genset?
Customer: replied 1 year ago.
It's an 8k series brand new Generac
Customer: replied 1 year ago.
Gh-410. Engine 8kw unit generac brand new
Expert:  Hank F. replied 1 year ago.
That does not help.
I need the model and serial numbers..
Customer: replied 1 year ago.
The generak 8k whole house connected to gas or propane only comes in one model. I do not have the serial number I appreciate your attempt but if you do not have enough info to answer my question I will have to go elsewhere and request a refund. Than you.
Expert:  Hank F. replied 1 year ago.
I have been an factory trained Generac technician for almost 15 years now, and I know Generac has made a LOT of models of home standby gensets that are 8k - 4109-0, 4109-1, 4389-0, 4389-1, 4673-0, 4673-1, 4758-0, 5501-0, 5516-0, 5518-1 - and these are just a few of the older models.
There are also many models of the newer units that are 8k.
I can not help you if I don't know exactly which unit you have.