How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I just replaced a motor and syinoid in a 1997 ezgo 36 volt

Customer Question

I just replaced a motor and syinoid in a 1997 ezgo 36 volt dcs cart. Motor makes a sound but does move the cart. I first tried just replacing the motor. It moved a fraction of an inch and quit. I knew the syinoid was bad so checked and it was hot. replace it. My old motor had FA1, A2, S1 and S2 terminals. The new has F instead of A terminals. Help Appreciated.
Submitted: 2 years ago.
Category: Small Engine
Expert:  JohnF2015 replied 2 years ago.
So all of the terminals on the new motor are F labeled?