How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How to install Cutter Deck Spring on 61V (part 483704). Appears

Customer Question

how to install Cutter Deck Spring on 61V (part 483704). Appears to be hard to make up the difference?
Submitted: 2 years ago.
Category: Small Engine
Expert:  Donald replied 2 years ago.
Hello and thank you for choosing Just Answer. My name is ***** ***** I will do my very best to get you the answer you need to your question.
I need to confirm something. Are you needing to know how to stretch your spring enough to attach the opposite end?
Expert:  Donald replied 2 years ago.
Please take a look at the image I have attached for you.
Expert:  Donald replied 2 years ago.
We can continue from here. Thanks!
Customer: replied 2 years ago.
yes. my manual shows it to be 62 instead of 66thanks
Expert:  Donald replied 2 years ago.
I can tell you how to stretch your spring. Gather a piece of rope that is about three to four feet long. Loop the rope over the hook on your spring, and double your rope, to make two ends. Now, pull your spring, using your rope, and attach it.
Expert:  Donald replied 2 years ago.
If you have a piece of rope from an old lawnmower, or chainsaw, it will work for this purpose as well.