How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1264
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

I have a craftsman mini tiller I removed the clutch and the

Customer Question

I have a craftsman mini tiller I removed the clutch and the small plastic piece that guides the pull rope was broken. I ordered the piece, but now I don't remember what attaches where and how the spring attaches to the piece and the pull housing. Is that too vague?
Submitted: 2 years ago.
Category: Small Engine
Expert:  Briggs-Fan replied 2 years ago.
Hi my name is ***** ***** welcome to just answer. , can you give me the tillers model number ?
Expert:  Briggs-Fan replied 2 years ago.
So your problem is with the starter top and spring etc parts 25 26 28 and 30 right , going by this diagram ?
http://www.jackssmallengines.com/Jacks-Parts-Lookup/Model-Diagram/MTD/58439/12220
Customer: replied 2 years ago.
http://c.searspartsdirect.com/lis_png/PLDM/1011575P-00001.pngIt is part 19 in this diagram. The "line trimmer accelerator lever". I don't have the machine in front of me, but this diagram is for model###-##-####
Expert:  Briggs-Fan replied 2 years ago.
In looking for you , there is a 4 part video where the guy replaces the hope so you can see it together
https://youtu.be/RiCfrfYJKQ0
I'm going to keep looking for clearer directions for you
Customer: replied 2 years ago.
The housing in that video is different from mine. It doesn't have the piece I am asking about.
Expert:  Briggs-Fan replied 2 years ago.
Ok I'm going to keep looking and check dome of the junk weedeater and tillers at my shop , but I will opt out so another professional can help you if they already have info on this