How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28925
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My trimmer is husqvarna 128djx, Engine was still running but

Customer Question

my trimmer is husqvarna 128djx, Engine was still running but trimmer blade was stop, in normal trimming position.when i made trimmer head up position trimmer blade was running yesterday. what was happened. i would like to get your answer? thank you so much.
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! The drive shaft for the trimmer works off a clutch on the engine, and the clutch attaches to the drive cable to the cutting head. The cable /upper handle may have slipped down and now the cable is not being driven by the clutch. Remove the upper section and check the shaft and the clutch.