How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a ryobi t430 with hammed head.

Customer Question

I have a ryobi t430. Same prob as person I'm reading. Line apparently melted or became jammed inside and won't push thru (not spooled head). Need to fix. Also purchased replacement heads but the bolt holding the current head on is unable to be moved. Touches sides of hex hole so completely I can't get ratchet head in at it. Any ideas??

Submitted: 2 years ago.
Category: Small Engine