How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 9633
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

Having a problem with a flat front tire on my craftsman sit-down

Customer Question

Having a problem with a flat front tire on my craftsman sit-down mower. The whell rim and tore are 1 yr old. Can't seem to refit tire tightly enough to reinflate. Was there a seal that is broken?? no inner-tube - just wheel and rim... vince h.
Submitted: 2 years ago.
Category: Small Engine
Expert:  Wayne replied 2 years ago.
Hi I'm Wayne
I will help you with this
What I do is wrap a rope around then insert a screw driver/bar under the rope,
twist it, and the bead will go against the rim,
inflate while holding this
If this helped you, Please rate my answer
If Not, Please USE REPLY BUTTON FOR MORE INFO