How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28098
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Toro z4325 Blades wont disengage, have a replacement part

Customer Question

toro z4325
Blades wont disengage, have a replacement part for the non working part , replaced it but blades wont disengage when its pushed down. They just stay on the whole time. What may have I done wrong on the install of the new part?
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! Maybe nothing! With everything off, check the blade drive belt on the electric pto. It should rotate and the clutch should rotate. If the clutch and blade do not, the clutch is frozen , and has a bad bearing in it. The clutch would need to be replaced.