How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28066
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How to replace a seal on wheel shaft of craftsmen rear tine

Customer Question

how to replace a seal on wheel shaft of craftsmen rear tine tiller
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! Front input shaft seal for the transmission. The hard part is getting the the front pulley off, the seal will come out the front of the transmission, Just pry it out, or put sheet metal screw into it and pull. Shows a snap ring on the shaft, but I think seal will go over it. If not, the snap ring will need to be removed.