How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 46" Husqvarna that I have measured and adjusted the

Customer Question

I have a 46" Husqvarna that I have measured and adjusted the blades until I have the bolt wore out and it is still cutting uneven I have tried everything it measures the same on both sides any ideas?
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! Where is the unevenness? Are the blades sharp and on in the right direction with the ears turned up? Are the spindles tight, with no up and down or side movement?