How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.R. Your Own Question
J.R., Small Engine Technician
Category: Small Engine
Satisfied Customers: 7445
Experience:  Owner of outdoor power equipment business, repairing all makes and models.
Type Your Small Engine Question Here...
J.R. is online now
A new question is answered every 9 seconds

Troy-bilt Pony-Replacng the solenoid-took off the old one and

Resolved Question:

Troy-bilt Pony-Replacng the solenoid-took off the old one and now can't remember where the wires reconnect? thanks
Submitted: 8 years ago.
Category: Small Engine
Expert:  J.R. replied 8 years ago.
What is the model number off of the tiller?
Customer: replied 8 years ago.
riding mower- model number number 13AN689G766
Customer: replied 8 years ago.
I had found this diagram on my own already- where does the ground connect and does it matter which red(both are red) connect to which side of the solenoid. The diagram does not show. One red goes to the battery, the other to the starter.
Expert:  J.R. replied 8 years ago.
It does not matter which side is hooked to which. It will work the same either way. One goes on each post and then the small wire from the key switch goes on the small terminal.
Customer: replied 8 years ago.
where does the ground wire go?
Expert:  J.R. replied 8 years ago.
It can attach to any clean ground on the tractor frame. You can attach it right where the solenoid mounts at.
J.R. and 3 other Small Engine Specialists are ready to help you