Small Appliance
Small Appliance Repair Questions? Ask a Technician ASAP
Connect one-on-one with {0} who will answer your question
Answered in 4 hours by:
2/17/2021
Category: Small Appliance
Satisfied Customers: 4,599
Experience: Owner/Partner at Bargain Box
VerifiedHi, I am Martyn, welcome to JustAnswer, I am sorry you are having these issues today, it can be frustrating. I am happy to try and help work with you to try to get this resolved if I can.
Check for rough patches and burrs everywhere the thread passes... use a fine emery board to polish
Tease out a QTip/Cotton bud etc to be a little fluffy, then trace all over the metal and plastic regions and the bobbin case… it will likely catch and show you where the burr is
If you believe that sending me an uploaded photo or two, of the problem area, even a video would be helpful .... here's how you do it
https://www.justanswer.com/help/how-do-i-send-photo-or-file-expert (Desktop is best)
It may take more than one exchange to get a fix, so please work with me, you are my eyes and ears here. Let me know how you get on
Regards
Martyn
OK, thank you, you're welcome
Glad to help
Best Wishes
M
Category: Small Appliance
Satisfied Customers: 4,599
Experience: Owner/Partner at Bargain Box
VerifiedMartyn Lloyd and 87 other Small Appliance Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a small appliance technicianLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Small Appliance Questions
How to raise feed dogs on Janome 1000. New. Never used. I'm
I'm just now trying to set up the machine to use. The illustrations show how to raise the feed dogs but nothing changes. Does the machine have to be threaded and with a bobbin in before the feed dogs change … read more
Chester
Associate Degree
2,689 satisfied customers
I cleaned my machine and now the upper threat won't pick up
I cleaned my machine and now the upper threat won't pick up the bobbin thread. … read more
canuck the pro
16,025 satisfied customers
I have a Janome 1600P. The thread is not staying in jumping
I have a Janome 1600P. The thread is not staying in jumping out of the bobbin when I sew. … read more
canuck the pro
16,025 satisfied customers
Machine stitches 3-4 stitches then clogs. Needle jams and
Machine stitches 3-4 stitches then clogs. Needle jams and goes up and down with a gun type sound. Have inserted a new needle which did not solve it. … read more
canuck the pro
16,025 satisfied customers
E2 error on a Janome memory craft 6600 won't work. MC6600P.
E2 error on a Janome memory craft 6600 won't work JA: Do you know the model of your Janome sewing machine? How old is it? Customer: MC6600P. JA: How long has this been going on with your Janome sewing… read more
Chester
Associate Degree
2,689 satisfied customers
I cleaned it, my Janome 6600 keeps making noise if I
I cleaned it, my Janome 6600 keeps making noise if I increase the speed. Its going at a moderate speed but I doing lengthy stich work so Id like it to go to 2 arrow speed … read more
canuck the pro
16,025 satisfied customers
We just opened a new Janome 2212 and the feed dogs do not
We just opened a new Janome 2212 and the feed dogs do not rise to the surface high enough to pull the fabric forward at all. Help! … read more
canuck the pro
16,025 satisfied customers
I have a janome sewing machine and my feed dogs won't pull
I have a janome sewing machine and my feed dogs won't pull the fabric thru. … read more
canuck the pro
16,025 satisfied customers
My Janine sewing machine won't move the fabric properly and
My Janine sewing machine won't move the fabric properly and the machine keeps jamming … read more
canuck the pro
16,025 satisfied customers
The feed dogs on my Viking 400 sewing machine aren't working
The feed dogs on my Viking 400 sewing machine aren't working properly. It doesn't act correctly which doesn't push the fabric through. I have tried multiple times to lift & lower them. Any ideas on wh… read more
canuck the pro
16,025 satisfied customers
The hand wheel on my janome 2212 is stuck. It just wont
the hand wheel on my janome 2212 is stuck JA: I'll do all I can to help. Can you tell me more about what's going on? Customer: it just wont turn JA: Is there anything else the Expert should be aware o… read more
canuck the pro
16,025 satisfied customers
I have a Jenome 8077; yesterday it was sewing perfectly but
I have a Jenome 8077; yesterday it was sewing perfectly but today every time I start it, the thread tangles under the feed dog. Ive taken it apart and cleaned it, but it does the same thing. It seems … read more
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
4,599 satisfied customers
I have a Janome JD 1818. Been making masks. I can wind a
I have a Janome JD 1818. Been making masks. I can wind a bobbin, but when I try to sew the machine completely seizes and the needle won't move up or down. … read more
canuck the pro
16,025 satisfied customers
My janome 11000 memory craft special edition keep knotting
my janome 11000 memory craft special edition keep knotting the thread in the bobbin and it stops sewing … read more
canuck the pro
16,025 satisfied customers
My Janome embroidery machine Memory Craft 500E is looping on
My Janome embroidery machine Memory Craft 500E is looping on the underside of the work. starts to sew design and within 6-8 stitches stops and the threads are all looped up on the back, when I then wa… read more
canuck the pro
16,025 satisfied customers
I have a Janome 400E Machine and the thread keeps getting
I have a Janome 400E Machine and the thread keeps getting caught up in the bobbin. I took it apart and cleaned and oiled it and it did not fix the problem. I do not know what to do next. Any help woul… read more
canuck the pro
16,025 satisfied customers
I am just using a straight stitch and my machine gets bound
I am just using a straight stitch and my machine gets bound up after just a couple of stitches. Poor description, but it gets caught in place and the thread is bound up and caught in the feed dogs. It… read more
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
4,599 satisfied customers
I have what i believe is a little singer 221-1. Thread was
I have what i believe is a little singer 221-1. Thread was wound around the bobbin and after I cleared that the bobbin encasement, not the holder, hits on the plate that goes over the feed dogs. What … read more
kingcobra80
Fitness Repair Expert
High School or GED
1,590 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.
Bagley, IA
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
< Previous | Next >
Meet the Experts:
Rob
Small Appliance Technician
151 satisfied customers
20 yrs. experience with a major worldwide manufacturer.
The Home Smithy
Handyman
102 satisfied customers
45 years of fixing things
russ
TECHNICIAN
101 satisfied customers
28 years experience
Appliance Tech-Care
Appliance Technician
86 satisfied customers
35+ Yrs Experience - 40,000+ 'Real World' Repairs
drcool299
Home Appliance Technician
78 satisfied customers
I have been in the business for the past 30 years. Repairs all kinds of home appliances.
Austin
Customer Service
215 satisfied customers
Technician
Christopher Coleman
178 satisfied customers
Owner at Big River Service Center
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
