Small Appliance

Small Appliance Repair Questions? Ask a Technician ASAP

Connect one-on-one with {0} who will answer your question

Related Small Appliance Questions
I'm free motion sewing and my thread snapped and the needle
I'm free motion sewing and my thread snapped and the needle jammed in the down position. I'm using a hoop so I can't move anything … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
I want to sew out a design I have purchased and my machine
I want to sew out a design I have purchased and my machine continuously stops and tells me to lock down the hoop or to change hoops. i am using the right hoop. … read more
canuck the pro
canuck the pro
14,278 satisfied customers
After the design I'm pressing go and it will not embroide
After the design I'm pressing go and it will not embroide and it say remove hoop. … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
My Topaz 50 is continuing to say remove the hoop even after
My Topaz 50 is continuing to say remove the hoop even after I had. I had previously moved the hoop to try and get it in the center. I asked it to. Save the changes. It then asked to “remove the hoop “… read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
Do I advance on mega hoop to next design? Designer Topaz
Designer Topaz 50....360 x 200 hoop....6 designs.....husband inadvertently shut off power and I have 3 more designs to stitch out. … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
I am needing help as I broke a needle when it hit the hoop.
I am needing help as I broke a needle when it hit the hoop. I replaced the needle and I get a message saying there's no needle when I push the 100 degree button … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
I was embroidering a design. Had to change the bobbin. The
I was embroidering a design. Had to change the bobbin. The first two times it worked fine. This time it did not return to the correct position to continue. I am about half way thru a 34,000 stitch des… read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
I have a topaz 50...In the middle of the design stitch out I
I have a topaz 50...In the middle of the design stitch out I needed to replenish the bobbin thread. Now I cant get back to where I was to complete the stitch. I dont recall the stitch count … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
Having an issue with my husqvarna topaz machine. the bobbin
having an issue with my husqvarna topaz machine. the bobbin thread won't come up. It's hard to describe but it looks to me that there is an issue with the mechanism between the bobbin and the little L… read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
When in embroidery and arm is supposed to return to home
When in embroidery and arm is supposed to return to home position, grinding noises . Then it worked but now embroidery designs do not stitch in correct positions in the hoop … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
My Janome Horizon is skipping stitches and wrapping thread
My Janome Horizon is skipping stitches and wrapping thread around the needle. Help trying to finish quilting a large quilt … read more
ExpertTechnician
ExpertTechnician
Self-employee owner of Technical Center
Associate Degree
518 satisfied customers
I hace a Viking Designer Topaz 40 sewing machine and it will
I hace a Viking Designer Topaz 40 sewing machine and it will not stay threaded. I took the cover off and noticed that the first thread tension mechanism looks like it is loose. I got the thread in the… read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
My Janome embroidery machine Memory Craft 500E is looping on
My Janome embroidery machine Memory Craft 500E is looping on the underside of the work. starts to sew design and within 6-8 stitches stops and the threads are all looped up on the back, when I then wa… read more
canuck the pro
canuck the pro
14,278 satisfied customers
I have a just out of the box Topaz 40 sewing machine. The
I have a just out of the box Topaz 40 sewing machine. The needle doesn't change positions to sewing anything, zigzag or decorative stitches. … read more
Christopher Coleman
Christopher Coleman
178 satisfied customers
I have a Viking Topaz 50 quilting embroidery machine. New
I have a Viking Topaz 50 quilting embroidery machine. New needle, cleaned bobbin case area, embroidery nesting in bobbin area and stopping machine with big knots. … read more
Christopher Coleman
Christopher Coleman
178 satisfied customers
I dropped a needle behind the feeddogs On a topaz 20 I cant
I dropped a needle behind the feeddogs On a topaz 20 I cant see it. I took the bobbin apart down to the plastic plate held by two visable screws when removed the plate still wouldn't come out can you … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
My embrodery arm on my Viking Topaz 25 embrodery machine
My embrodery arm on my Viking Topaz 25 embrodery machine will calibrate but after that it comes up again and makes a noise and doesn't move … read more
Martyn Lloyd
Martyn Lloyd
Lecturer in Theatre Design Studies (BA Hons)
3,596 satisfied customers
I have a Husqvarna Topaz 30 embroidery machine. The warning,
I have a Husqvarna Topaz 30 embroidery machine. The warning … read more
Expert
Expert
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Rob

Rob

Small Appliance Technician

151 satisfied customers

20 yrs. experience with a major worldwide manufacturer.

The Home Smithy

The Home Smithy

Handyman

102 satisfied customers

45 years of fixing things

russ

russ

TECHNICIAN

101 satisfied customers

28 years experience

Appliance Tech-Care

Appliance Tech-Care

Appliance Technician

86 satisfied customers

35+ Yrs Experience - 40,000+ 'Real World' Repairs

Christopher Coleman

Christopher Coleman

178 satisfied customers

Owner at Big River Service Center

Mark M

Mark M

Appliance Repair

37 satisfied customers

Handyman at Self

Austin

Austin

Customer Service

29 satisfied customers

Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x