Small Appliance

Small Appliance Repair Questions? Ask a Technician ASAP

Connect one-on-one with {0} who will answer your question

Related Small Appliance Questions
I have a Janome memory craft 6600P i was do stitch no 35
I have a Janome memory craft 6600P i was do stitch no 35 which is a blanket stitch and I tried to enlarge the length of the stitch and the machine wants to sew backwards. It show a E2 error … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I am having difficulty getting the needle to start sewing in
I am having difficulty getting the needle to start sewing in a specific spot. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I bought the embroidery hoop 140X180 and installed the
I bought the embroidery hoop 140X180 and installed the software on my machine. The embroidery worked fine, but now that I am back in sewing mode, it has uninstalled the HP plate. I broke a needle when… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I have the Janome Memory Craft 9900. I was sewing, went over
I have the Janome Memory Craft 9900. I was sewing, went over to iron and when I came back to switch to a zigzag stitch only the first 4 stitch choices light up. I turned it off and when I turned it back on for a split second an icon appears with a red arrow and red crossed out circle pointing toward the power switch and an hour glass with 6 4 sided “flowers”. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I have a memory craft 9900. When I turn it on it has an
I have a memory craft 9900. When I turn it on it has an error message saying to lift presser foot and needle bar then turn on again … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
My Memory Craft 9000 won't let me select any stitches other
My Memory Craft 9000 won't let me select any stitches other than forward and backward. Memory cards won't work either … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
My walking presser foot is not walking properly. The
My walking presser foot is not walking properly. The stitches are tiny and jamming underneath. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
My mom is trying to make a label to put on a quilt. She has
My mom is trying to make a label to put on a quilt. She has the Janine 9400 memory craft QCP, and step one is to select the A on the screen, but it doesn't show up in bold to select it. Is there a way… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
After winding a bobbin the display will not go back to the
After winding a bobbin the display will not go back to the regular sewing screen. This is a 17 yr old Memory Craft 4800. Computerized … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I have a Janice 440000 memory craft machine that I can't.
I have a Janice 440000 memory craft machine that I can't. Get the warning of raise,pressure foot and bar etc off the machine … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
Need to determine if the pressure foot on a Janome memory
Need to determine if the pressure foot on a Janome memory craft 8900 QCP is a 9 ml pressure foot. I am ordering a replacement foot and they ask … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
My Janome PROFESSIONAL Memory Craft 6500 sewing machine is
My Janome PROFESSIONAL Memory Craft 6500 sewing machine is suddenly making a lot of noise and the stitches on the back of the fabric (from the bobbin) are a mess. I've had the machine for over 6 years… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I have a Janome memory craft 9000, and the dogs only go up
I have a Janome memory craft 9000, and the dogs only go up and down not front and back, can this be corrected … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I have a horizon memory craft horizon 7700.Set it on factory
Thank you.I have a horizon memory craft horizon 7700.Set it on factory default.Screen setting..3.0 and 0.00 … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I have Janome MC 11000. The machine will not come on until I
I have Janome MC 11000. The machine will not come on until I turn it off and on 25+- times. It gives a block on the screen saying put needle position up and presser foot up. But these are already in p… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I am just using a straight stitch and my machine gets bound
I am just using a straight stitch and my machine gets bound up after just a couple of stitches. Poor description, but it gets caught in place and the thread is bound up and caught in the feed dogs. It… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
The on my 6600 Memory Craft Janome where the needle fits has
The shank on my 6600 Memory Craft Janome where the needle fits has become bent doing the fancy stitching. Even sewing a straight stitch, the needle comes unthreaded. Can this piece be replaced. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
I am unable to embroider on my memory craft 8000. After
I am unable to embroider on my memory craft 8000. After setting up and pressing the "start" button, the screen says to attach the P foot and lower the presser foot. I have already done this, so I am n… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
2,421 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Rob

Rob

Small Appliance Technician

151 satisfied customers

20 yrs. experience with a major worldwide manufacturer.

The Home Smithy

The Home Smithy

Handyman

102 satisfied customers

45 years of fixing things

russ

russ

TECHNICIAN

101 satisfied customers

28 years experience

Appliance Tech-Care

Appliance Tech-Care

Appliance Technician

86 satisfied customers

35+ Yrs Experience - 40,000+ 'Real World' Repairs

drcool299

drcool299

Home Appliance Technician

13 satisfied customers

I have been in the business for the past 30 years. Repairs all kinds of home appliances.

woody463

woody463

Home Appliance Technician

216 satisfied customers

39 years repairing home appliances

Christopher Coleman

Christopher Coleman

178 satisfied customers

Owner at Big River Service Center

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x