Small Appliance

Small Appliance Repair Questions? Ask a Technician ASAP

Connect one-on-one with {0} who will answer your question

Related Small Appliance Questions
The bobbin thread does not pull up when trying to embroider.
The bobbin thread does not pull up when trying to embroider. Or if it does after a few stitches the thread will shred. It sews fine with the regular sewing and zigzag stitches etc. We have tried every… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
My Janome Memory Craft 6600 has a bobbin problem suddenly
My Janome Memory Craft 6600 has a bobbin problem suddenly went from a good zigzag stitch on both the top and bottom to a good top stitch but the bottom is messed up. I have cleaned it tried winding a … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
I timing has gone out of sync. It only does have a Janome
Hi, I timing has gone out of sync. It only does have a Janome MC12000 and for the 4th time, my timbroideringing has gone out of sync. This is the 4th time this has happened. It does it when I am embro… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
When I start to sew the needle just jumps up and down. No
When I start to sew the needle just jumps up and down. No sewing. I get an error of E1. I have cleaned the hook race and the holder but the problem did not correct. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
9900 embroidery machine keeps stopping saying thread
9900 embroidery machine keeps stopping saying thread broke.have changed needles bobbin and cleaned machine.played with bobbin tension. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
I am embroidering on my Janome 500E and the bobbin is making
I am embroidering on my Janome 500E and the bobbin is making a terrible rattling sound, but the embroidery looks ok on the front and the back. I am using the "high tension" yellow bobbin case and Jano… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
I own the MC8900QCP & have been trying to find out how to
I own the MC8900QCP & have been trying to find out how to ‘embroider' on this machine. I've failed at trying to figure this out & wonder if I could use the many stitch designs it does have & use embro… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
My Janome PROFESSIONAL Memory Craft 6500 sewing machine is
My Janome PROFESSIONAL Memory Craft 6500 sewing machine is suddenly making a lot of noise and the stitches on the back of the fabric (from the bobbin) are a mess. I've had the machine for over 6 years… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
I am trying to use a twin needle. The right needle keeps
I am trying to use a twin needle. The right needle keeps skipping stitches. I am seeing on a knit fabric using a ball point needle … read more
ExpertTechnician
ExpertTechnician
Self-employee owner of Technical Center
Associate Degree
518 satisfied customers
My Janome Horizon is skipping stitches and wrapping thread
My Janome Horizon is skipping stitches and wrapping thread around the needle. Help trying to finish quilting a large quilt … read more
ExpertTechnician
ExpertTechnician
Self-employee owner of Technical Center
Associate Degree
518 satisfied customers
I have a janome skyline sewing machine and it has developed
I have a janome skyline sewing machine and it has developed a problem. My zigzag feature doesn't produce zigizg. Its to perform th e straight stitch but that is it. … read more
ExpertTechnician
ExpertTechnician
Self-employee owner of Technical Center
Associate Degree
518 satisfied customers
My hand wheel keeps getting stuck. I can't get the needle to
My hand wheel keeps getting stuck. I can't get the needle to move down … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,319 satisfied customers
My Janome embroidery machine Memory Craft 500E is looping on
My Janome embroidery machine Memory Craft 500E is looping on the underside of the work. starts to sew design and within 6-8 stitches stops and the threads are all looped up on the back, when I then wa… read more
canuck the pro
canuck the pro
plumber
15,156 satisfied customers
My machine is skipping stitches and I was told it is a
My machine is skipping stitches and I was told it is a timing problem in the computer. What is your opinion … read more
Christopher Coleman
Christopher Coleman
178 satisfied customers
Need to repair a brother sewing machine, jc2517, Jx2517, The
Need to repair a brother sewing machine JA: What's the sewing machine's make and model? And can you guesstimate how old it is? Customer: jc2517 JA: Do you plan on doing the work yourself? Customer: Jx… read more
Russell H.
Russell H.
Computer/Electronics Consultant
Vocational, Technical or Trade Scho
26,906 satisfied customers
Trouble with my brand new Juki. uneven stitiches, look fine
trouble with my brand new Juki. uneven stitiches, look fine on top but underside shows skipped stitches and a bit of tangling. Tried a different thread, checked needle to thread size, bobbin wound eve… read more
ElectronicsPete
ElectronicsPete
7 satisfied customers
We have a Janome MC9900, sewing/embroidery machine. In regular
We have a Janome MC9900, sewing/embroidery machine. In regular sewing straight stitch mode the bobbin holder catches the needle and eventually hangs up or breaks the thread. This machine is 3 months o… read more
Michael
Michael
Appliance Repair Technician
Bachelor's Degree
400 satisfied customers
I have a 35 year old Bernina Sewing Machine that still works
I have a 35 year old Bernina Sewing Machine that still works fine, but today I was not able to do the zigzag stitch. It sews straight fine. What would cause it to not do the zigzag stitch? Thank you f… read more
Expert
Expert
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Rob

Rob

Small Appliance Technician

151 satisfied customers

20 yrs. experience with a major worldwide manufacturer.

The Home Smithy

The Home Smithy

Handyman

102 satisfied customers

45 years of fixing things

russ

russ

TECHNICIAN

101 satisfied customers

28 years experience

Appliance Tech-Care

Appliance Tech-Care

Appliance Technician

86 satisfied customers

35+ Yrs Experience - 40,000+ 'Real World' Repairs

Christopher Coleman

Christopher Coleman

178 satisfied customers

Owner at Big River Service Center

Mark M

Mark M

Appliance Repair

37 satisfied customers

Handyman at Self

Austin

Austin

Customer Service

29 satisfied customers

Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x