Small Appliance

Small Appliance Repair Questions? Ask a Technician ASAP

Connect one-on-one with {0} who will answer your question

Related Small Appliance Questions
Have a simplicity celebrity sewing machine- had been sewing
Have a simplicity celebrity sewing machine- had been sewing great, perfect stitches until just recently the bottom stitches appear to have a dropped or occasional loose stitch and instead of stitches … read more
Mike R.
Mike R.
4,237 satisfied customers
The on my 6600 Memory Craft Janome where the needle fits has
The shank on my 6600 Memory Craft Janome where the needle fits has become bent doing the fancy stitching. Even sewing a straight stitch, the needle comes unthreaded. Can this piece be replaced. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
My bobbin housing does not seem to be turning properly. It
My bobbin housing does not seem to be turning properly. It turns to allow the hook to pick up the thread and does not turn the rest of the way or turn back. The needle hits the bobbin housing. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
My upper thread breaks after I lift the foot peddle and move
my upper thread breaks after I lift the foot peddle and move the material forward to create a gap. I then lower the foot peddle and begin to sew, the thread breaks … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
The presser feet on my Bernina 215 are not straight on the
The presser feet on my Bernina 215 are not straight on the shank and so my needle hits the presser foot instead of going into the fabric- I have changed needles but that does not seem to be the issue-… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
The machine was running full speed without my foot on the
The machine was running full speed without my foot on the pedal and after I unplugged it and replu ged it in it has a picture of a foot on the foot pedal and won"t run at all. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
HELP! I am getting a C6 error code on my Singer Modern
Hi. and HELP! I am getting a C6 error code on my Singer Modern Quilter Model 8500, 6 months old. I am ONLY getting the error code while sewing in straight stitch mode..zig zag is no problem. It stitch… read more
Bonifacio Gomez
Bonifacio Gomez
Technical course
216 satisfied customers
I have a Husqvarna Viking Quilt Designer and I was using it
I have a Husqvarna Viking Quilt Designer and I was using it today to sew some denim. I had several layers of material and it jammed and would not complete the stitch. I turned it on and off several ti… read more
Bonifacio Gomez
Bonifacio Gomez
Technical course
216 satisfied customers
I have a Pfaff 1420. It is giving Error 1420. What does that
I have a Pfaff 1420. It is giving Error 1420. What does that mean? … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
Bernina 530 Special Edition. The BSR foot 42, plugged in,
Bernina 530 Special Edition. The BSR foot 42, plugged in, isn't recognized on the screen. The computer only shows foot #1 and it sews, but it isn't regulating the stitch. Feed dog button is pushed in,… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
My singer 7463 suddenly made a thread ball from the bobbin
My singer 7463 suddenly made a thread ball from the bobbin side when I accidentally started to sew … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
I have a Bernina 165 sewing machine. When I push on the
I have a Bernina 165 sewing machine. When I push on the presser foot the machine seems to hesitate then will sew a few stitches then stop.If I press on the presser foot it does the same thing. … read more
kingcobra80
kingcobra80
Fitness Repair Expert
High School or GED
1,020 satisfied customers
I have a singer 2010 professional that it will only run on
Hi I have a singer 2010 professional that it will only run on auto it does no that the foot pedal is plugged in but can't get it to work with the machine. I do have a new foot pedal and tried it and i… read more
Russell H.
Russell H.
Computer Technology Consultant
Vocational, Technical or Trade Scho
14,224 satisfied customers
I have a Singer Curvy sewing machine and when a do a zig zag
I have a Singer Curvy sewing machine and when a do a zig zag stitch or anything other than a straight stitch it won't pick up the left side so all I get are holes from the needle and the top and bobbi… read more
Russell H.
Russell H.
Computer Technology Consultant
Vocational, Technical or Trade Scho
14,224 satisfied customers
I have a 9400 QCP Janome and my screen has icon keys that
I have a 9400 QCP Janome and my screen has icon keys that are not highlighted and I can't access...??? … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
Can you please help me. I have a Brother Sewing Machine
Can you please help me. I have a Brother Sewing Machine SQ9185. I have a J presser foot and also N presser foot. Which one do I use for a straight stitch only. My problem is, is that my machine is pro… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
643 satisfied customers
Can you help with Singer Sewing Machine question? I don't
can you help with Singer Sewing Machine question? I don't think of it as an appliance, more just a machine. Sorry - I don't want to waste your time. Thank you. … read more
Russell H.
Russell H.
Computer Technology Consultant
Vocational, Technical or Trade Scho
14,224 satisfied customers
Bernina 830 stopped holding stitches while completing a
Bernina 830 stopped holding stitches while completing a design. Bobbin is full. Needle still threaded. Will straight stitch in regular sewing mode, ho back to embroidery mode, stitches not holding, ju… read more
Michael
Michael
Appliance Repair Technician
Bachelor's Degree
400 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Rob

Rob

Small Appliance Technician

151 satisfied customers

20 yrs. experience with a major worldwide manufacturer.

The Home Smithy

The Home Smithy

Handyman

102 satisfied customers

45 years of fixing things

russ

russ

TECHNICIAN

101 satisfied customers

28 years experience

Appliance Tech-Care

Appliance Tech-Care

Appliance Technician

70 satisfied customers

35+ Yrs Experience - 40,000+ 'Real World' Repairs

Jon

Jon

Appliance Technician

32 satisfied customers

Appliance Service Technician with 10+ years experience.

The Appliance Guy

The Appliance Guy

Home Appliance Technician

14 satisfied customers

Owner/Technician of a Home Appliance Business for 6 years. 25 years electrical/mechanical experience.

woody463

woody463

Home Appliance Technician

128 satisfied customers

39 years repairing home appliances

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x