Small Appliance Repair Questions? Ask a Technician ASAP
Hello and thanks for using this service, if you have been waiting do not worry or get upset. I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. I just picked up your question now. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly I am not paid anything until you rate my service good using the STAR RATING LINK at the top of your page, the money is paid to the site not me directly.
Normally the cliff or bumper sensor can get dirty causing that issue. You should clean all of the sensors off really well and see if that corrects the issue. You can use a cue tip and cleaner to make sure they are all clean. If that does not correct it you may have a bumper sensor issue and will need a part to repair the problem
CLICK HERE FOR SENSOR LOCATIONS
All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am paid anything through the site and that will also get you a DIRECT LINK emailed to you to get back to me!.....tips are greatly appreciated so thank you very much for using this service. If you have any other questions just post back to me here anytime!