Small Appliance

Small Appliance Repair Questions? Ask a Technician ASAP

Connect one-on-one with {0} who will answer your question

Related Small Appliance Questions
I get the error of check and rethread the upper thread.. The
I get the error of check and rethread the upper thread.. The thread is not broke. I cut the thread and rethread the upper thread. Start the machine and after a few stitches, I get the same message. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a Spirit embroidery machine. When I try to use it,
I have a Spirit embroidery machine. When I try to use it, the safety device locks the machine, and there is a vibration in the upper area. It was suggested to me that there might be thread tangled up … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a Janome 10000 embroidery machine. I keep getting an
I have a Janome 10000 embroidery machine. I keep getting an error message that something is stuck, material too thick or bent needle. I have checked no bent needle the material I am sewing is 2 layers… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have the walking foot on and all of a sudden the needle
I have the walking foot on and all of a sudden the needle broke and it jammed and would not release. I was able to get it I jammed by taking the bobbin case out. I cleaned,oiled the machine and replac… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a Janome 659. Fabric is getting caught in the feed
I have a Janome 659. Fabric is getting caught in the feed dogs. As i begin to stitch there is a noise and after 2 stitches it stalls and the fabric has to be removed. I cleaned the hook race and feed … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a baby lock Ellure plus as I was trying to finish a
I have a baby lock Ellure plus as I was trying to finish a project my machine sounding like it was hitting something under the plate and the needle got stuck I was able to free it but it wont sew now … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
First of all, I only use my babylock for embroidery...not
Hi...first of all , I only use my babylock for embroidery...not sewing. I have a Babylock Ellageo. I am getting the error message. The safety device has been activated. Is the thread tangled? Is the N… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
My pe770 makes a lot of noise and then the needle stops as
my pe770 makes a lot of noise and then the needle stops as it is going down and I get a message that the Safety Device has been activated. I cannot raise it without turning the wheel toward the back. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a baby lock Esante and I am getting The safety device
I have a baby lock Esante and I am getting The safety device has been activated. Is the thread tangled or needle bent? I have changed the needle, checked for tangled thread but the needle will not mov… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a Baby Lock Spirit embroidery machine. It was going
I have a Baby Lock Spirit embroidery machine. It was going along just fine when it made a vibrating noise (the bobbin thread was vibrating back and forth) and locked. It had a message that a safety de… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I am in the middle of an appliqué and the bobbin began
I am in the middle of an appliqué and the bobbin began drawing thread from top and bunching. Removed loop and plate untangled thread replace everything and now I get message safety device has been act… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
Not picking up bobbin thread. I have removed the bobbin
Not picking up bobbin thread. I have removed the bobbin casing,, cleaned it thoroughly and reassembled it. I have reassembled it several times and still no luck. This is a front load bobbin with a bob… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I was freehand quilting my daughter's tshirt/memory quilt
I was freehand quilting my daughter's tshirt/memory quilt for her graduation and was almost done. All of a sudden the machine jammed and the safety device activated. I have a babylock quilters choice.… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I have a Pfaff 1420. It is giving Error 1420. What does that
I have a Pfaff 1420. It is giving Error 1420. What does that mean? … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
My quilters choice machine started jamming with shutter
My quilters choice machine started jamming with shutter going into the down position and the message the safety device has been activated appears. I cant see any thread jams. Help … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
4,088 satisfied customers
I recently purchased a JUKI 1541S and am having problems
I recently purchased a JUKI 1541S and am having problems with the bobbin stitch. It starts OK but then starts missing stitches. … read more
Pete
Pete
Electronic Engineer
29,996 satisfied customers
My error message keeps coming up on my machine, it's not
My error message keeps coming up on my machine, it's not seeing, I have changed the needle, redheaded it. Awhile back I was working on a project and the thread bunched up in the bobbin area so I had t… read more
Michael
Michael
Appliance Repair Technician
Bachelor's Degree
400 satisfied customers
I have a Brother Pace Setter Ult Version 4.01 Home Em
I have a "Brother Pace Setter Ult Version 4.01" Home Embroidery machine. The safety device keeps being activated and the message "The safety device......Is the thread tangled? Is the needle bent?' I c… read more
Al-Moderator
Al-Moderator
High School or GED
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
Last Updated: 12-20-22

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Rob

Rob

Small Appliance Technician

151 satisfied customers

20 yrs. experience with a major worldwide manufacturer.

The Home Smithy

The Home Smithy

Handyman

102 satisfied customers

45 years of fixing things

russ

russ

TECHNICIAN

101 satisfied customers

28 years experience

Appliance Tech-Care

Appliance Tech-Care

Appliance Technician

86 satisfied customers

35+ Yrs Experience - 40,000+ 'Real World' Repairs

Christopher Coleman

Christopher Coleman

178 satisfied customers

Owner at Big River Service Center

Mark M

Mark M

Appliance Repair

37 satisfied customers

Handyman at Self

Austin

Austin

Customer Service

29 satisfied customers

Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less
Last Updated: 12-20-22

Ask Your Question

x