Small Appliance

Small Appliance Repair Questions? Ask a Technician ASAP

Connect one-on-one with {0} who will answer your question

Related Small Appliance Questions
My bobbin in showing on top of my embroidery design. I've
My bobbin in showing on top of my embroidery design. I've got the correct weight bobbin in my machine. I tried changing the tension but it still shows. Any suggestions? … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
No matter how I change the tension on the top thread, change
No matter how I change the tension on the top thread, change out the type of bobbin thread, or change out the bobbin case for the one with increased tension, my bobbin thread shows through when I am e… read more
canuck the pro
canuck the pro
14,251 satisfied customers
Bobbin loops show in top if fabric but thread tension is set
Bobbin loops show in top if fabric but thread tension is set at 1. … read more
Susan Latta
Susan Latta
Kitchen and Bath Designer, Contractor
Bachelor's Degree
351 satisfied customers
I was in the middle of embroidering and the “Press the
I was in the middle of embroidering and the “Press the needle position” came on. I did what it asked and my needle either doesn't move or it makes a shimmering sound. What do I do? … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
I have Brother Innovis 2800. Is breaking needles and thread
I have Brother Innovis 2800. Is breaking needles and thread constantly … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
I get the error of check and rethread the upper thread.. The
I get the error of check and rethread the upper thread.. The thread is not broke. I cut the thread and rethread the upper thread. Start the machine and after a few stitches, I get the same message. … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
When embroidering the pattern is showing the bobbin thread
When embroidering the pattern is showing the bobbin thread on the top fabric. I tried changing needles, rethreading, changing bobbin thread, turning the machine off and restarting and even unplugging … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
When sewing or embroidering the machine sew for 1/2 inch and
When sewing or embroidering the machine sew for 1/2 inch and stops with the message :check and recheck the upper thread". BUT ..the thread does not need to be rethead because the upper thread is still… read more
Chester
Chester
Associate Degree
1,713 satisfied customers
The upper tension is not working at all. (brother innovis
The upper tension is not working at all. (brother innovis NX-650Q it's an older machine) … read more
canuck the pro
canuck the pro
14,251 satisfied customers
My needle is stuck in the down position. I just purchased
My needle is stuck in the down position. I just purchased this machine and was doing machine applique. The bobbin thread kept jamming and I would have the gear problem come up. After I cleared everyth… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
I am embroidering on my Janome 500E and the bobbin is making
I am embroidering on my Janome 500E and the bobbin is making a terrible rattling sound, but the embroidery looks ok on the front and the back. I am using the "high tension" yellow bobbin case and Jano… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
I have a Husqvarna Designer Ruby machine. I think the bobbin
I have a Husqvarna Designer Ruby machine. I think the bobbin casing is not working - the machine sews for a few stitches, the bobbin sounds "jumpy" then the threads no longer sew material. … read more
canuck the pro
canuck the pro
14,251 satisfied customers
I have a Brother PE770 embroidery machine and all of a
I have a Brother PE770 embroidery machine and all of a sudden I only pull bobbin thread when I embroider. I have adjusted the upper thread tension from -3 all the way to 5 and still the same, just whi… read more
canuck the pro
canuck the pro
14,251 satisfied customers
Brother HC1850 Sewing machine, the motor jams and I get and
Brother HC1850 Sewing machine, the motor jams and I get and E6. I have checked all treads and changed them cleaned machine blowing out any fuzz and checked for threads. What else can I do … read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
I was given an older pc 6500 and while the machine keeps
I was given an older pc 6500 and while the machine keeps saying "check upper tension", the upper tensioning seems fine. However, the bobbin thread keeps coming up through the needle hole. And I've ret… read more
Martyn Lloyd
Martyn Lloyd
Owner/Partner
Lecturer in Theatre Design Studies (BA Hons)
3,436 satisfied customers
why isnt my brother innovi 2800d not cutting the bobbin thread?
why isn't my brother innovi 2800d not cutting the bobbin thread? It looks like the tension is off also. On the bottom of sewn fabric it has a loop every 1/4" to 1/2" of sewn line.… read more
Expert
Expert
I HAVE A PC-8500 THAT GIVES ME THE ERROR: THREAD ENTANGLED
I HAVE A PC-8500 THAT GIVES ME THE ERROR: THREAD ENTANGLED OR BENT NEEDLE AND IS STUCK INSIDE THE MACHINE. THERE IS NO THREAD ENTANGLED AND IT HAD A BRAND NEW NEEDLE. CAN YOU TELL ME HOW TO FIX THIS?… read more
Russell H.
Russell H.
Computer/Electronics Consultant
Vocational, Technical or Trade Scho
27,378 satisfied customers
I have a quilt and craftpropfaff7530 Itis atleast10 years old.The
I have a quilt and craftpropfaff7530 Itis atleast10 years old.The thread bunchesupon the bottomandthentheneedle bendsCan you help me?… read more
Russell H.
Russell H.
Computer/Electronics Consultant
Vocational, Technical or Trade Scho
27,378 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Rob

Rob

Small Appliance Technician

151 satisfied customers

20 yrs. experience with a major worldwide manufacturer.

The Home Smithy

The Home Smithy

Handyman

102 satisfied customers

45 years of fixing things

russ

russ

TECHNICIAN

101 satisfied customers

28 years experience

Appliance Tech-Care

Appliance Tech-Care

Appliance Technician

86 satisfied customers

35+ Yrs Experience - 40,000+ 'Real World' Repairs

Christopher Coleman

Christopher Coleman

178 satisfied customers

Owner at Big River Service Center

Mark M

Mark M

Appliance Repair

37 satisfied customers

Handyman at Self

Austin

Austin

Customer Service

29 satisfied customers

Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x