How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Saturn
Satisfied Customers: 816
Experience:  ASE Master Tech 15+ Years
Type Your Saturn Question Here...
George H. is online now
A new question is answered every 9 seconds

I have a 2007 ion with ecotec 2.2. It has code P0341 and it

Customer Question

I have a 2007 ion with ecotec 2.2. It has code P0341 and it has no spark or fuel. So it will turn over but not run.
JA: Have you scanned the code? Have you tried to reset it?
Customer: Yes
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have installed crank position sensor and cleared all codes. After trying again I get code P0341
JA: Anything else you think the mechanic should know?
Customer: There is no spark and the fuel pump just primes. There is no pressure above that.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Saturn Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Saturn
Expert:  StLouisWayne replied 1 year ago.

Hello. My name is ***** ***** I will be helping you today.

What do you mean the fuel pump just primes?

Customer: replied 1 year ago.
I hear it when I turn the key initially. Maybe not I guess. I have a fuel pressure gauge on it and I get nothing. I also do not get any spark. I was getting a crank position sensor code. (The car was not running them) so now I changed that out. I am now getting the cam sensor code. I get no spark or fuel.
Expert:  StLouisWayne replied 1 year ago.

Do you have a noid light?

Customer: replied 1 year ago.
I do
Expert:  StLouisWayne replied 1 year ago.

Use it on the coils and injectors and see if its flashing on either of them.