How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Saab
Satisfied Customers: 23112
Experience:  ASE Master and Advanced level certified. Factory trained with 17 years dealership experience
Type Your Saab Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My 2006 Saab 9-3 hazard lights do not turn on. When I press

Customer Question

Hello, my 2006 Saab 9-3 hazard lights do not turn on.
JA: Just to clarify, what are the exact lights you're talking about?
Customer: When I press the hazard button nothing happens.
JA: Are you fixing your 9-3 yourself? What have you tried so far?
Customer: So far I have not tried anything. I assume it may be a fuse, but I do not see anything in the manual for a hazard fuse.
JA: Anything else you want the mechanic to know before I connect you?
Customer: The amp under the driver seat was replaced about 3 months ago. I don't know of any connection, but just for his general knowledge.
Submitted: 10 months ago.
Category: Saab
Expert:  Kevin replied 10 months ago.

Hi im kevin there is no seperate fuses for hazard lights so if indicators are working ok then its most likely that the hazard switch is at fault

Customer: replied 10 months ago.
How do I get at the hazard switch to inspect or replace?
Expert:  Kevin replied 10 months ago.

I dont have a guide for this il opt out another tech may have one

Customer: replied 10 months ago.
Ok. Thank you
Expert:  sprinkles08 replied 10 months ago.

Hello and welcome to JustAnswer!

The hazard switch is part of the a/c control head and can't be removed or serviced separately. To accurately diagnose the issue it's going to require a scan tool to be able to monitor module data. If the turn signals do work but the hazards do not then the switch is almost surely the cause, but there isn't anything you'd be able to test at the switch itself.