How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john aka eauto Your Own Question
john aka eauto
john aka eauto, The Car Guy
Category: Saab
Satisfied Customers: 16049
Experience:  ase certified 16 + years experience
Type Your Saab Question Here...
john aka eauto is online now
A new question is answered every 9 seconds

I have all ready done that but here it is again how do you

Customer Question

i have all ready done that but here it is again how do you remove the raidiator from a 98 saab 900 se turbo
Submitted: 1 year ago.
Category: Saab
Expert:  john aka eauto replied 1 year ago.

NOTE: Step numbers below refer to numbers used in the illustrations.


  1. Remove the charge air cooler.
  2. Remove the grille.
  3. Release the engine oil cooler (as equipped) and hang it up in such a way that the hoses are not damaged.
  4. Remove the condenser from the radiator.
  5. Disconnect and remove the battery.
    • Remove the battery shelf.
  1. Open the drain plug and drain the coolant.
    • Remove the lid on the expansion tank to speed up the draining.
  1. Remove the bypass hose together with the intake hose.
  2. Undo the upper radiator hoses from the radiator.
  3. Separate the radiator fan's electrical connections.
  4. Release the servo pump's oil pipe and the clips for the radiator's breather hose from the radiator crossmember and turn the oil pipe to one side.
  5. Remove the 2 screws securing the radiator fan cover and lift it in.
  6. On models with automatic transmission, remove the gearbox's oil pipes by the oil cooler, remove the screw which holds the pipes to the radiator and plug the connections.
  7. On all models, remove the lower radiator hose from the radiator, remove the clamps which hold the radiator to the radiator crossmember and pull up the radiator from the rubber securing points so that the clips for the cable can be undone.
  8. Lift out the radiator.