How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
19317657
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

I have fridge 2652 when I turn on it clicks then clicks

Customer Question

Hello, I have fridge 2652 when I turn on it clicks then clicks again in a couple seconds and check light come on. Tried 12v, 120v and gas will not start either. Brian
Submitted: 11 months ago.
Category: RV
Expert:  Michael Reush replied 11 months ago.

Hi, first thing to do is go to the back of the refrigerator, open the access door , and remove the metal at the burner assy so you can access it, now blow it out. The rust from the heat stack falls right on the burner, lets see if we can get it to start on gas, then we will move to the electric side, thanks Michael

Customer: replied 11 months ago.
ok i'll try this first.
Expert:  Michael Reush replied 11 months ago.

Thanks for responding, get back to me and let me know what happens, Michael

Customer: replied 11 months ago.
ok sounds like gas is working have on auto with battery on, whats next.
Customer: replied 11 months ago.
Looks like check light stayed off.
Customer: replied 11 months ago.
what about electric
Customer: replied 11 months ago.
I did replace control board with Dinosaur micro p-711 which good for board taken off and applied wiring to go with 2-way fridge.
Expert:  Michael Reush replied 11 months ago.

Hi, now make sure there is power at the outlet behind the refer, and make sure the fuses on the board are good. put the refer on auto, and see if the heating elements heat up. Let me know, sorry I had to go away for a bit

Customer: replied 11 months ago.
will do
Expert:  Michael Reush replied 11 months ago.

thanks

Customer: replied 11 months ago.
ok fridge is getting cold on gas, 110 outlet is hot
Customer: replied 11 months ago.
gas did start with only battery on
Expert:  Michael Reush replied 11 months ago.

Let it run on 110 for a while, and see if the back where the heating element is stays hot

Customer: replied 11 months ago.
should I hit auto off or keep on
Expert:  Michael Reush replied 11 months ago.

put it on auto, it favors 110v when available

Customer: replied 11 months ago.
ok on auto but gas still on
Expert:  Michael Reush replied 11 months ago.

when on auto and 110v is available, it should switch to electric, it can take a minute or so, this is a function of the control board

Expert:  Michael Reush replied 11 months ago.

what I do to test is go to the back with the refer on auto, plug and unplug the cord, it should go back and forth between electric and gas

Customer: replied 11 months ago.
ok i'll wait till gas stops and test
Expert:  Michael Reush replied 11 months ago.

thats right

Customer: replied 11 months ago.
ok I turned unit off and auto off and turned unit back on, sofar no check light. I'll come back later and check.
Expert:  Michael Reush replied 11 months ago.

I will look for your response, thanks Michael

Related RV Questions